男男互攻互受H啪肉NP文,国产乱妇乱子在线播放视频,国产亚洲AV片在线观看18女人,国产精品视频久久久

一．適用：

泳衣高彈布，萊卡布，牛仔布。

二、外觀組成及說明：

外觀及組成：白色(半透明)狀粘稠體，聚氨酯聚合物

布氏粘度：120000~140000CPS

PH值：7.0±0.5

固體含量：45%±1

三、特性

彈性好、遮蓋力好、牢度好、耐水洗、易過網,高附著力，手感特柔軟，耐高溫蒸煮。耐黃變.常溫下保存12個月，（避免45℃以上高溫或-25℃以下低溫）低溫耐折型，免過熱型，高附著力。屬于環保型。（雙組份）

PU230A高彈水性墨白（雙組份）：遮蓋力好，牢度好，彈性好，手感中軟，易過網，高附著力，耐黃變，超低溫耐折型，抗回粘性能優，防凍，用于轉印燙畫與彩印結合力強以及耐水洗超強

PU230B高彈水性墨透（雙組份）：高透明，得色率好，牢度好，彈性好，手感中軟，易過網，高附著力，耐黃變，超低溫耐折型，抗回粘性能優，防凍

四、參考配方

五、操作流程：

1）印花工藝：網紗80-100目印花→印2-3次2刀→烘干、干燥→熱處理或熱壓(130-140℃,8-12秒)

2）由于面料多種多樣，在印花之前需要先行測試。在有涂層的布料上印花，需要測試布料涂層跟PU體系的粘結強度.。未確定情況使用或操作不當引起的質量問題本公司概不負責 。

Otherdetailedinformation:

一．Substrates:

Swimsuithighstretchcloth,Lycraanddenim.

二．Appearancecompositionandspecification:

Appearanceandcomposition:whiteviscousbody,polyurethanepolymer.

Brinellviscosity:120000-140000CPS

PHvalue:7.0±0.5

Solidcontent:45%±1

三．Features

Highstretch,highcoveringpower,goodfastnessandresistanttowash,easytothroughscreen,highadhesion,softhandfeel,resistanttohightemperaturesteamingandyellowing.Theshelflifeis12monthsatroomtemperature(avoidover45℃hightemperatureorbelow-25℃lowtemperature.)Folding resistance at low temperature,over flashing free,high adhesion.(two-component)

PU230A high elastic waterbased ink white（two-component）：good covering power,good wash fastness,high tensile strength,soft hand feel,easy to print,high adhesion,resistance to yellowing,ultra-low temperature folding ,excellent performance of non-after tack,anti-freeze.It has a strong combination between transfer printing and color printing ,meanwhile excellent washable performance.

PU230B high elastic waterbased ink clear（two-component）：High transparency,good color yield rate,good wash fastness,high tensile strength,soft hand feel,easy to print,high adhesion,resistance to yellowing,ultra-low temperature folding,excellent performance of non-after tack,anti-freeze.

五．Operationprocess

1.printingtechnology:80-100meshscreen printing—printing 2-3 times—drying—heat treatment or heat pressure(130-140℃，8-12seconds)

2.Duetovariousfabrics,makingtestsbeforeprinting.printingonthecoatedcloths,shouldhaveatestaboutadhesionstrengthbetweencoatedfabricsandPUsystem.Usingoroperatinginuncertaincondition,ourcompanyisnotresponsibleforqualityproblem.